|
Auto Glass F.A.Q.'s - Frequently Asked Questions
Q: How can I tell if my windshield can be repaired?
A: If the damage is NOT in the "Acute Area", the area where the driver must look out of the windshield the majority of the time, it can usually be repaired.
If the damage is a "ding" and the area has been kept free of dirt and moisture it can almost always be repaired. In most cases dings can be repaired so that they will be barely noticeable.
Q: How long does a "ding" repair take?
A: Most "dings" can be repaired in 30 to 60 minutes. However, circumstances such as dirt or moisture can prolong some repair jobs.
Q: Why is the windshield so important to my safety?
A: Through the years automobile manufacturers have begun to design windshields as an major part of the support given to the roof of a vehicle. Air bags also make the windshield's strength important. When an air bag deploys it opens at an incredible 150 to 200 miles and hour. This energy must be absorbed by the windshield. In order that you and your passengers remain safe the integrity of the windshield must be maintained so it can handle the stress of air bags opening.
Q: If shops use the same glass in a replacement - what makes Advance Auto Body & Glass different when they replace a windshield?
A: Use of the proper glass is important, but the techniques and other materials used in glass replacement can make-or break an installation (no pun intended).
At Advance we remove all moldings, clips and other restraints in the glass area. We check the site for any rust - which can compromise a good installation. The area is vacuumed to remove debris and then the old adhesive is cut to allow us to remove the glass.
The new glass is checked for fit before installation. The remaining old adhesive is then cut to allow better access and fit. We check the area again for rust and prime any scratches prior to the next step. The inside surface of the new windshield is cleaned and "primed" with special materials for better adhesion in the new installation. We then apply a bead of urethane to the pinch weld on top of the prepared area on the vehicle.
The new windshield is then installed over this urethane bead. All clips, screws, molding and other fasteners are replaced. We reinstall the wipers (which are almost always removed prior to an installation) and test them to assure proper positioning. The new glass is cleaned, inside and out, and the installation area is vacuumed again to remove any installation debris.
Then depending upon the type of urethane used, the temperature and the humidity - we allow the installation to "cure" for the proper length of time to assure a strong seal between the vehicle body and the windshield. We will NOT sacrifice safety for speed when installing a new windshield!
Q: How long will a windshield replacement take?
A: There are a lot of things that can impact a replacement job.
• The model of vehicle.
• The condition of the vehicle body.
• The style of glass originally used and the availability of a proper replacement.
• The weather conditions which impact the urethane curing time.
• And more.
Customer satisfaction is what keeps us #1 in Brandon!
|
|
|
Why use us for your auto glass needs?
• Free estimates no appointments needed just stop by and we will have our estimating technician give you a complete written estimate while you wait in a clean and friendly environment.
• Glass replacement done in one day.
• Windshield repairs done at your convenience.
• Free courtesy cars - all new and with all the extra's you expect from us.
|
...one of our Toyota courtesy cars
|
|
|
